Extra Help for Question 5
Provide the pollutant emissions for this emission point. Include the following: the CAS number, the maximum controlled emission rate at design capacity in pounds per hour or pounds per day, the maximum controlled emission rate at design capacity in pounds per hour or pound per day (if a control device is not used, enter “NA.”), the annual potential to emit in tons per year, and the expected actual annual emissions. Note that the potential to emit should be calculated based upon the definition of potential to emit in Sate of Delaware “Regulations Governing the Control of Air Pollution” Regulation No. 30 available at: http://www.dnrec.state.de.us/air/aqm_page/regs.htm. The expected actual emissions should reflect the proposed operating hours provided on Form AQM-1. Note that the form requires that volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) be listed as a group and by individual component. Any pollutants that are emitted at less than 0.2 pounds per day do not have to be listed.
Extra Help for Question 9
Provide the pollutant emissions for this emission point. Include the following: the CAS number, the maximum controlled emission rate at design capacity in pounds per hour or pounds per day, the maximum controlled emission rate at design capacity in pounds per hour or pound per day (if a control device is not used, enter “NA.”), the annual potential to emit in tons per year, and the expected actual annual emissions. Note that the potential to emit should be calculated based upon the definition of potential to emit in Sate of Delaware “Regulations Governing the Control of Air Pollution” Regulation No. 30 available at: http://www.dnrec.state.de.us/air/aqm_page/regs.htm. The expected actual emissions should reflect the proposed operating hours provided on Form AQM-1. Note that the form requires that volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) be listed as a group and by individual component. Any pollutants that are emitted at less than 0.2 pounds per day do not have to be listed.
Extra Help for Question 13
Provide the pollutant emissions for this emission point. Include the following: the CAS number, the maximum controlled emission rate at design capacity in pounds per hour or pounds per day, the maximum controlled emission rate at design capacity in pounds per hour or pound per day (if a control device is not used, enter “NA.”), the annual potential to emit in tons per year, and the expected actual annual emissions. Note that the potential to emit should be calculated based upon the definition of potential to emit in Sate of Delaware “Regulations Governing the Control of Air Pollution” Regulation No. 30 available at: http://www.dnrec.state.de.us/air/aqm_page/regs.htm. The expected actual emissions should reflect the proposed operating hours provided on Form AQM-1. Note that the form requires that volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) be listed as a group and by individual component. Any pollutants that are emitted at less than 0.2 pounds per day do not have to be listed.
Extra Help for Question 17
Provide the pollutant emissions for this emission point. Include the following: the CAS number, the maximum controlled emission rate at design capacity in pounds per hour or pounds per day, the maximum controlled emission rate at design capacity in pounds per hour or pound per day (if a control device is not used, enter “NA.”), the annual potential to emit in tons per year, and the expected actual annual emissions. Note that the potential to emit should be calculated based upon the definition of potential to emit in Sate of Delaware “Regulations Governing the Control of Air Pollution” Regulation No. 30 available at: http://www.dnrec.state.de.us/air/aqm_page/regs.htm. The expected actual emissions should reflect the proposed operating hours provided on Form AQM-1. Note that the form requires that volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) be listed as a group and by individual component. Any pollutants that are emitted at less than 0.2 pounds per day do not have to be listed.
Extra Help for Question 19
Provide the overall process emissions. Include the following: the CAS number, the maximum controlled emission rate at design capacity in pounds per hour or pounds per day, the maximum controlled emission rate at design capacity in pounds per hour or pound per day (if a control device is not used, enter “NA.”), the annual potential to emit in tons per year, and the expected actual annual emissions. Note that the potential to emit should be calculated based upon the definition of potential to emit in Sate of Delaware “Regulations Governing the Control of Air Pollution” Regulation No. 30 available at: http://www.dnrec.state.de.us/air/aqm_page/regs.htm. The expected actual emissions should reflect the proposed operating hours provided on Form AQM-1. Note that the form requires that volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) be listed as a group and by individual component. Any pollutants that are emitted at less than 0.2 pounds per day do not have to be listed. The overall process emissions should be a summary of the individual emission point information provided above.
Extra Help for Question 22
Indicate whether the source is new or existing. A new source is any source that is not currently permitted by the Department or any source that is currently permitted by the Department that will be modified in such a way that the fixed capital cost of the new components will exceed 50% of the fixed capital cost of a comparable entirely new source.
