The Air Quality Management Section uses a building block approach to permit applications. This building block approach allows you to custom design your application to meet your specific project needs. There are five categories of forms in the application form series. All Regulation No. 1102 applicants other than auto body shops, dry cleaners, gasoline dispensing facilities, gasoline tank truck (delivery vessel) operators, and air stripping/soil venting operations will use this series. If you are an auto body shop, dry cleaning facility, gasoline dispensing facility, gasoline tank truck (delivery vessel) operator, or air stripping/soil venting operation, click here to proceed directly to your forms. If not, please continue on for further instructions. If you do not need further instructions, click here to proceed directly to a table of the forms.
Please Note: All forms should be saved to your computer before you begin filling them out.
All Regulation No. 1102 applications must include one AQM-1: Administrative Information form. This form provides all of the administrative information regarding your application. Instructions for Form AQM-1 are also provided.
All Regulation No. 1102 applications must include an AQM-2: Overall Process Flow Diagram form for EACH process being applied for. This form provides the overall process flow and indicates which forms are being included in the application.
Example AQM-2 forms for different processes are provided below:
AQM-2: Example Silo to Baghouse Process Flow Diagram
AQM-2: Example Coating Operation to RTO Process Flow Diagram
AQM-2: Example Stone Crusher Powered by Engine Process Flow Diagram
All Regulation No. 1102 applications must include one AQM-3: Process Equipment form for EACH emission unit in EACH process being applied for. These forms provide emission units specific information. If the emission unit does not meet one of the specific types listed in AQM-3.2 through AQM-3.12, use the AQM-3.1: Generic Process Equipment Application form.
AQM-3.1: Generic Equipment Application
Instructions for Form AQM-3.1
AQM-3.2: Boiler Application
Instructions for Form AQM-3.2
AQM-3.3: Generator/Engine Application
Instructions for Form AQM-3.3
AQM-3.4: Coating Operations Application
Instructions for Form AQM-3.4
AQM-3.5: Volatile Organic Storage Tank Application
Instructions for Form AQM-3.5
AQM-3.6: Cold Solvent Cleaner (Degreaser) Application
Instructions for Form AQM-3.6
AQM-3.7: Silo Application
Instructions for Form AQM-3.7
AQM-3.8: Used Oil Heater Application
Instructions for Form AQM-3.8
AQM-3.9: Crushed Stone Equipment Application
Instructions for Form AQM-3.9
AQM-3.10: Fines Crusher Application
Instructions for Form AQM-3.10
AQM-3.11: Crematories Application
Instructions for Form AQM-3.11
AQM-3.12: Printing Operations Application
Instructions for Form AQM-3.12
AQM-3.13: Grain Terminal, Elevator, and Drying Application
Instructions for Form AQM-3.13
If a process being applied for includes a control device, the application must include one AQM-4: Control Device form for EACH control device in EACH process being applied for. These forms include control device specific information.
AQM-4.1: Incinerator, Afterburner, and Oxidizer Application
Instructions for Form AQM-4.1
AQM-4.2: Adsorption Equipment Application
Instructions for Form AQM-4.2
AQM-4.3: Flare Application
Instructions for Form AQM-4.3
AQM-4.4: Scrubber Application
Instructions for Form AQM-4.4
AQM-4.5: Inertial and/or Cyclone Collector Application
Instructions for Form AQM-4.5
AQM-4.6: Baghouse Application
Instructions for Form AQM-4.6
AQM-4.7: Electrostatic Precipitator Application
Instructions for Form AQM-4.7
AQM-4.8: Venturi Scrubber Application
Instructions for Form AQM-4.8
AQM-4.9: Selective Catalytic Reduction (SCR), Selective Non-Catalytic Reduction (SNCR), Non-Selective Catalytic Reduction (NSCR), and Ammonia Injection Application
Instructions for Form AQM-4.9
AQM-4.10: Settling Chamber Application
Instructions for Form AQM-4.10
AQM-4.11: Knockout Application
Instructions for Form AQM-4.11
All Regulation No. 1102 applications must include one AQM-5: Emissions Information form for EACH process being applied for. This form includes emissions information for each emission point and process. Instructions for Form AQM-5 are also provided.
Your Regulation No. 1102 application may include one AQM-6: Air Emissions Modeling Application form for EACH process being applied for. This form includes emissions modeling information. This form is optional; however, completing this form may expedite processing of your permit. Instructions for Form AQM-6 are also provided.
All Application Forms should be mailed to:
Air Quality Management
156 South State Street
Dover, Delaware 19901
All checks should be made payable to:
State of Delaware
For a list of permit fees, click here.
For help calculating your permit fees, click here.
